Carbon 12K - 12000lb Winch V3 with Black Hook

Carbon Winch 12k 12000lb Electric 12v 4x4 Winch
Version 3 2023 Model - Now IP68 Waterproof
5 Year Australian Warranty
Lightest 4x4 Winch

• Part number: CW-12k
• Rated line pull: 12000 lbs, (5450 kg) single-line
• Motor: 12V DC 6.2HP series wound motor (24V option available)
• Remote Control: Remote Switch, 12ft (3.7m) lead.
• Wireless Remote Control: Included
• Geartrain: 3-Stage Planetary.
• Gear Ratio: 216:1
• Clutch (free spooling): Rotating Ring Gear clutch with manual pull and twist clutch handle
• Brake: Full load automatic brake installed in the motor housing end plate.
• Fairlead: Multi-fit CNC billet alloy black anodised with laser etched logo
• Lifetime Mechanical Warranty
• 5 Year Electrical Warranty
• 5 Year Water Ingress Protection Warranty
• Synthetic Rope: 24m x 10mm diameter
• Drum Diameter/Length: 64mm x 224mm
• Mounting Bolt Pattern: 254mm x 114.3mm
• Recommended Battery: 650 CCA minimum for winching
• Winch Dimensions (L x W x H): 21.7'' x 6.3'' x 6.8'' (552 x 160 x 172mm)
• Packing Dimensions (L x W x H): 24.2" x 14.5" x 9.8" (615 x 370 x 250mm)
• Winch weight with synthetic rope attached: VERSION 3 - 19.0kg
• Winch weight including synthetic rope, control box complete with cables, mounting bolts & fairlead: 23.45kg 

   

  Winch Features

  • Designed by an Australian offroad business for the harsh Aussie and international conditions
  • IP68 rated fully sealed to resist water, dirt and dust ingress into motor, drum and gearbox mechanisms
  • 12000lb pulling power with a fast line pull ratio of 216:1 using a triple planetary gear set
  • 6.2HP series wound 12 volt electric motor (24 volt option)
  • Wireless remote control unit with a lanyard - FULLY SEALED RECEIVER UNIT built into the control box. Simple to activate by holding both buttons down for 3 seconds to activate the remote control and turns off after 90 seconds of inactivity.
  • The rotating ring gear clutch design minimises freespool drag and completely eliminates clutch engagement issues.
  • Electroplated planetary gear sets for long life
  • 3 layer membrane breather unit pre-fitted to the electric motor to allow condensation to evaporate and equalise pressure during heat cycles

  • Multi Fit Fairlead - there is no need to worry about which suits your bullbar! Simply install as standard fitment or move up to offset the rope outlet by 20mm
  • Fully zinc electroplated internals for corrosion protection
  • High performance motor brushes with copper impregnated contacts and corrosion plated brush mounts
  • Smooth ball bearing motor operation with a fully balanced motor armature for superior performance
  • Superior holding power by utilising a hoist style brake unit mounted to the drum end plate which applies mechanical braking through the gear train with no heat generated in the drum. No contact to the drum means there is no risk of heat damage to the synthetic rope
  • 4 position mounting for the control box bracket over the motor; over the drum, on top for flat mounting plates or in front of the winch for the top mounting control box when the winch is mounted vertically. Alternatively, 500mm cables allow remote mounting of the control box separately to the winch

  What's in the Box

  
  
  • 1 x Carbon 12K winch
  • 24m x 10mm high strength synthetic winch rope
  • 1 x Carbon winch hook
  • 1 x 600A solenoid box Inc - all battery cables, wireless remote receiver, multi-fit mount
  • 1 x Long black battery cable
  • 1 x Wireless remote
  • 1 x Wired remote 
  • 1 x Multifit CNC Alloy fairlead (offset and standard position)

  • 4 x Mounting bolts
  • 3 x Allen keys
  • 2 x Additional longer mounting bolts (fairlead mounting)
  • 2 x Additional nuts for remote mounting solenoid box
  • 1 x Hook hand saver strap
  • 1 x Carbon lanyard
  • 1 x Carbon stubby cooler
  • 1x Installation manual